AIR QUALITY HEALTH INDEX
| LOCATION: | AQI: | DATE: | ||||||||||||||||||||
|
||||||||||||||||||||||
AIR MONITORING STATIONS
View data from each station:
- Fort McKay (AMS 1)
- Mildred Lake (AMS 2)
- Lower Camp Met Tower (AMS 3)
- Buffalo Viewpoint (AMS 4)
- Mannix (AMS 5)
- Patricia McInnes (AMS 6)
- Athabasca Valley (AMS 7)
- Fort Chipewyan (AMS 8)
- Barge Landing (AMS 9)
- Albian Mine Site (AMS 10)*
- Lower Camp (AMS 11)
- Millennium (AMS 12)
- Syncrude UE-1 (AMS 13)
- Anzac (AMS 14)
- CNRL Horizon (AMS 15)
- Albian Muskeg River (AMS 16)*
*Note: AMS 10 was retired due to mining in the location. It has been replaced with AMS 16 which is 4km SE of the former AMS 10 site.
Millennium (AMS 12)
This station was originally placed at the south end of the Suncor Energy Ltd. mine. The station was moved to a new location across the bridge on the Suncor plant site due to logistical difficulties with the original site.
The Millenium Station contains analyzers that continuously measure SO2, TRS, THC, NO, NO2 NOX, PM 2.5, wind speed and direction, and temperature. Non-continuous measurement devices include a PM10 and VOC's.
Current Data
| Time of Data: 2012-02-23 03:00:00 (Mountain Standard Time)
| ||
| Parameter | Hourly Average | Guideline |
| SO2 | 0.00 ppb | 172 ppb |
| TRS | Z/S | 10 ppb |
| NO | 0.37 ppb | |
| NO2 | 6.03 ppb | 159 ppb |
| NOX | 6.87 ppb | |
| THC | 2.19 ppm | |
| PM2.5 | 5.97 ug/m3 | |
| Temp @ 2m | -8.77 deg. C | |
| Wind Speed @ 10m | 8.86 km/h | |
| Wind Dir. @ 10m | 10.01 deg. | |
All air quality monitoring data displayed on this site by the Wood Buffalo Environmental Association is directly from monitoring equipment output signals. Displayed data is generally indicative of ambient conditions, however, it has not been reviewed, validated, nor processed for baseline drift and other fluctuations by qualified technicians. Final processed and validated data values may vary from values displayed on this site. A displayed value of 'n/d' indicates air monitoring data is not available at the corresponding time due to scheduled maintenance and/or instrument calibration. Charted data is locked to the range of the analyzer by default, and can be unlocked by the appropriate control. To access quality-checked and validated historical data, please visit the Casa Data Warehouse: www.casadata.org